If the device status appears as offline in the project icon, then the SIG350 must first be
switched online. Click on the offline button to do so.
The IP address of the SIG350 is displayed in the project tile. It can be changed by
clicking on the pencil icon. A window appears with the TCP/IP settings in which changes
can be made.
A restart of the device is then required, which is automatically performed by the device.
OPERATION
8
8027834./2022-06-10 | SICK O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
71
Subject to change without notice
To Next Page
Loading...
