SICK EtherNet/IP SIG350 - Operating Conditions; Electrical Specifications; EtherNet;IP Technical Details

Table 44: Operating conditions
Operating temperature -25 °C ... +70 °C
1)
Storage temperature -40 °C ... +80 °C
1)
EMC EN 61000-6-2:2016
EN 61000-6-4:2020
Impact load EN 60068-2-27
1)
Permissible relative humidity 0% ... 95% (non-condensing)
Electrical data
Table 45: Electrical data
Voltage supply UA 18 ... 30VDC
1)
Voltage supply US 18 ... 30VDC
1)
Voltage supply
(PWR1 and
PWR2)
Current consumption ≤180mA @ 24V
2)
Max. current carrying capacity ≤16A, US
3)
≤16A, UA
3)
Port (S1-S8) Pin 1 max. supply current 2 A
Pin 2 max. supply current (DO) 2 A
Pin 4 max. supply current (DO) 2 A
Max. current carrying capacity per
port
4 A
Max. current carrying capacity of all
IO-Link ports (S1-S8)
4)
10A
Input characteristics EN 61131-2 type 1 + type 3
Protection class III
5)
1)
Each for US and UA, typ. supply voltage 24V DC
2)
Without load, sensors and outputs switched off
3)
≤ +40 °C (see "Derating", page 23).
4)
Max. current per port includes both the output current (pin 4 and pin 2, if applicable) and the current
consumption of the connected device (pin 1).
5)
When using a SELV or PELV power supply unit
EtherNet/IP
Table 46: EtherNet/IP
Transmission rate 100Mbit/s
Maximum distance
between NodeMax Length
of cable
100m
Process data (implicit con‐
nection)
Depending on selected assemblies, minimum cycle time: 1ms
Max. process input data 328 byte
Max. process output data 262 byte
Asynchronous data (explicit
connection)
Manufacturer-specific classes per module
Observed standard IEEE802.3u (100Base-Tx)
Max. number of connec‐
tions
3
Ethernet connections 2
CIP services DLR, QoS
EDS file Available at www.sick.com
12 TECHNICAL DATA
78
O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350 8027834./2022-06-10 | SICK
Subject to change without notice