SICK IDM 1 Series Quick Start

Quickstart
Q U I C K S T A R T e n
1 About this document
This Quickstart serves as a quick reference for the installation and operation of
IDM hand-held scanners.
They are configured by scanning individual configuration codes or a sequence of
configuration codes. Configuration codes are presented in this document; factory
settings are indicated by the symbol ◆.
Supplementary and other relevant documents:
•
Further language versions of this document (available online).
•
Operating instructions for IDM hand-held scanners (available online).
These documents and additional information, such as application examples and
downloads of associated documents and associated software, can be found
on the SICK product page on the Internet at www.sick.com/[product_family],
for example for the product family IDM240: www.sick.com/IDM24x
2 Product description
Product families
IDM141
2
5
4
3
1
6
7
IDM241
1
5
4
3
2
IDM161/IDM261
1
5
4
3
2
6 7
8
9
ß
1
Connection indicator
2
Status indicator
3
Beeper
4
Reading window
5
Trigger
6
Battery compartment
7
End cap
8
Mounting eye (metal)
9
Mounting eye (plastic)
ß
Retaining screw
IDM Bluetooth base stations
IDMx41 smart base station
5
4
1
6
2
3
IDMx41 charging station
5
4
1
7
3
IDMx61 smart base station
4
1
5
2
3
8
IDMx61 charging station
4
1
5
7
7
1
Operating indicator
2
Status indicators
3
Paging/Reset pushbutton
4
Host interface
5
DC female connector
(power supply unit)
6
Quick Pair barcode
7
Reserved
8
Quick Pair barcode
2.1 Indicators
Hand-held scanner
Description Connection indicator Audible signal
Wireless active
Flashes blue once every
2.5s
Off
Wireless inactive
Flashes blue three times
every 2s
Off
During connection Flashes blue rapidly Short clicks
Wireless connection estab‐
lished
Flashes blue once every
2.5s
4 ascending audible signals
Wireless connection discon‐
nected
Flashes blue three times
every 2s
4 descending audible signals
Data transmission Flashes blue rapidly Short clicks
Description Status indicator Audible signal
Charging (on base station) Permanently red Off
Fully charged (on base sta‐
tion)
Permanently green Off
Batch scanning active
Flashes green once every
2.5s
Off
Connection error
Flashes blue 3times every
2s
Off
Memory full Flashes red twice 2 long audible signals
Rechargeable battery low
Flashes red once at regular
intervals
1 audible signal at regular
intervals
Rechargeable battery
extremely low
Flashes red once 8 audible signals
Successful reading Flashes green once
1 audible signal following
successful scan
Configuration is running Permanently red Off
“Uninstall” status
Flashes red and green alter‐
nately
Off
Upgrade status Permanently red Short click
Timeout warning Off 3 long audible signals
Paging via smart base station Off 6 audible signals for paging
Sleep mode/rechargeable
battery depleted
Off Off
Power off Off Off
Smart base station
1
2
1
2
1
Operating indicator
2
Status indicator
Description
Indicators
Audible signal
Operating indi‐
cator
Status indicator
Voltage supply on Flashes blue
once
Off Audible signals
when switching
on
Upgrade status for smart base sta‐
tion
Off Permanently red Short clicks
“Uninstall” status Off Flashes red and
green alternately
Off
PICO mode Wireless active Permanently
blue
Permanently
green (left status
LED only)
Off
Wireless inactive Off Permanently red Off
PAIR mode Wireless active Permanently
blue
Off Off
Wireless inactive Off Permanently red Off
Paging of smart
base station
via scanner
PICO mode Permanently
blue
Permanently
green (left status
LED only)
6 audible signals
for paging
PAIR mode Permanently
blue
Off 6 audible signals
for paging
8028120//2022-10-28/en IDM Bluetooth (IDMxx1-4xx) | SICK 1
8028120//2022-10-28
www.sick.com
IDM Bluetooth (IDMxx1-4xx)
SICK AG
E
rwin-Sick-Straße 1
DE-79183 Waldkirch

SICK IDM 1 Series Specifications

General

Brand	SICK
Model	IDM 1 Series
Category	Scanner
Language	English