SICK IDM120 Series

8015904/YIT8/2015-03-02 © SICK AG · Germany All rights reserved - Subject to change without notice
8
9. Serial Interface Quick Set
To quickly change the record suffix when using serial interface (RS232 or
USB Com Port) you can use codes below. How the serial output string looks
like can be seen below as well. Please note that the other parts of the string,
e.g. pre- or postamble can be configured via the configuration codes in
chapter “Serial Interface Control”.
STX Preamble Data Length Prefix ID Scanned Data
Suffix ID Postamble ETX
Record
Suffix
1 char. 1-15 char. 2-4 digits 1 or 3 char. Variable 1 or 3 char. 1-15 char. 1 char. 1 char.
- Record Suffix -
None TAB
LF
CR ◆ SPACE
CRLF
- Baud Rate –
115.2K BPS 4800 BPS
19.2K BPS
57.6K BPS 2400 BPS
9600 BPS ◆
38.4 BPS 1200 BPS