Figure 8: Dismantling front connector
3. Remove the defective device.
4.
Mount new device.
5. Mount front connector with connected cables to the new device: First mount in the
device with bent hook and then engage in the housing.
Figure 9: Mounting the front connector
✓
T
he front connector engages with an audible click.
MOUNTING 5
8020868/ZX84/2018-11-15 | SICK O P E R A T I N G I N S T R U C T I O N S | ReLy EMSS1
19
Subject to change without notice
To Next Page
Loading...
