SICK RFH5 Series

7 Commissioning
7.1 Overview of the commissioning steps
7.1.1 Commissioning using SOPAS ET for demonstration purposes
RFH5xx
SOPAS ET
SiLink2 Master 1 Transponder 2
1
SIG200 (IO-Link Master)
2
Transponder
Prerequisites:
•
SICK SiLink2 IO-Link master with wall plug and enclosed USB cable
•
IO-Link device (RFH5xx)
•
IO-Link cable (male/female connector)
•
Computer (Windows) with installed SOPAS ET configuration software
Certain functions (e.g., Edit parameters) require you to be logged in to the device
( Device > Log in menu).
Table 6: Factory-set passwords
User level Authorizations Keyword according to factory
setting
Maintenance Read parameters operator
Maintenance Read and write parameters maintenance
Service Read and write parameters service
Procedure:
1. Connect the device (RFH5xx) to the voltage-free IO-Link master.
COMMISSIONING
7
8025309/1KDE/2023-12-19 | SICK O P E R A T I N G I N S T R U C T I O N S | RFH5xx
31
Subject to change without notice