NOTE
This page needs some time for loading all IO-Link device data. There is no "loading"
information appearing. It can happen that the visualization needs ~20 s or more untill
all parameters are visualized.
The following figure shows the view in case a corresponding IODD file for an IO-Link
device was uploaded:
Figure 8: CONFIGURATION page, IO-Link devices
NOTE
The correct IODD file must be uploaded and provided in the device configuration for this
section to be displayed.
The following figure shows the view if no IODD file is supplied; default IO-Link parame‐
ters are visualized:
7
SIG200 CONFIGURATION
22
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8024482.1FJ7 /2022-05-31 | SICK
Subject to change without notice
To Next Page
Loading...
