Device Info
Provides a device overview of any attached IO-Link device. This section will display the
details of any attached IO-Link sensor regardless of port configuration.
Parameter Data
Use this section to issue individual IO-Link commands to the attached device.
Data Storage
Use the commands in this section for advanced management of an IO-Link devices
data storage.
Upload:
If the IO-Link device is parameterized to Backup/Restore, this button is used to upload
the device parameterization to the local data storage container of the SIG200. If the
IO-Link device is parameterized to Restore, this button deletes the contents of the port
data storage container and reinitializes the port.
NOTE
Be aware that the current configuration is deleted and replaced with the new configura‐
tion from the IO-Link device.
Download / Import / Export:
Export and Import allow you to copy the contents of a port data storage container from
one SIG200 to a second SIG200. Once the contents of the data memory have been
imported into the second SIG200, they can be downloaded to the connected IO-Link
device.
NOTE
If the individual underside for the ports remains empty, then either no IO-Link device is
physically connected to the SIG200 or the connected device is not an IO-Link device.
SIG200 CONFIGURATION 7
8024482.1FJ7 /2022-05-31 | SICK O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200
23
Subject to change without notice
To Next Page
Loading...
