SICK SIG200 - Page 50

JSON parameters Type Description
functionTag
String The user can assign a name with this parameter, which
describes the function of the device in the system. Refer
to the data sheet of the connected IO-Link device to see
whether the parameter is available.
Sample response:
{
"vendorId": 26,
"deviceId": 8389010,
"iolinkRevision": "1.1",
"vendorName": "SICK AG",
"vendorText": "www.sick.com",
"productName": "SIG100",
"productId": "1089792",
"productText": "IO-Link Sensor Hub",
"serialNumber": "18301211",
"hardwareRevision": "1.0",
"firmwareRevision": "1.1.2.R",
"applicationSpecificTag": "Test device"
}
Sample request:
{
"applicationSpecificTag": "Test device"
}
GET/devices/{deviceAlias}/events
Reading the events of the IO-Link device.
Query parame‐
ters
Type Description
top
Integer Filter to output only the first events after switching on
the supply voltage.
bottom
Integer Filter to output only the most recent events in time.
Sample response:
[
{
"time": "00:23:21:37.897",
"severity": "ERROR",
"message": {
"code": 4096,
"mode": "APPEARS",
"text": "General malfunction - Unknown error"
},
"origin": {
"deviceAlias": "master1port1",
"portNumber": 1,
"masterNumber": 1
}
}
]
GET/devices/{deviceAlias}/processdata/value
GET/devices/{deviceAlias}/processdata/getdata/value
7 SIG200 CONFIGURATION
50
O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200 8024482.1FJ7 /2022-05-31 | SICK
Subject to change without notice