SICK SIG200 - Page 51

GET/devices/{deviceAlias}/processdata/setdata/value
Reading the input and/or output process data, where the length of the process data
depends on the connected device.
Query parame‐
ters
Type Description
format
Enum
[“byteArray”/
“iodd”]
Selection of the process data structure. Either as a byte
array (default) or according to the data structure and
typing stored in the IODD. Requires prior upload of the
correct IODD.
http://192.168.2.1/iolink/v1/devices/master1port1/processdata/value
http://192.168.2.1/iolink/v1/devices/master1port1/processdata/set-
data/value?format=iodd
JSON parameters Type Description
getData
Object Input process data of the connected device.
setData
Object Output process data of the connected device.
valid
Boolean Describes the validity of the process data.
iqValue
Boolean Output state pin 2.
cqValue
Boolean Output state pin 4.
Sample response:
SIG200 CONFIGURATION
7
8024482.1FJ7 /2022-05-31 | SICK O P E R A T I N G I N S T R U C T I O N | Sensor Integration Gateway - SIG200
51
Subject to change without notice