What to do if the red 'Error' LED is illuminated on a SICK SiLink2 Master IOLA2US-01101?
If the red 'Error' LED is lit on your SICK Adapter due to a data transmission error, the solution is to transmit the data again. Alternatively, a short-circuit could be the cause, in which case, replace the SiLink2 Master.
General| Product Name | SiLink2 Master IOLA2US-01101 |
|---|---|
| Category | Adapter |
| Manufacturer | SICK |
| Fieldbus | IO-Link |
| Family | SiLink2 |
| Housing material | Plastic |
| Supply voltage | 24 V DC |
| Protection Class | IP20 |
| Communication Protocol | IO-Link |
| Type | Master |
| Interfaces | USB |
Specifies the intended application and correct operational procedures.
Outlines prohibited uses and potential hazards from misuse.
Details the necessary qualifications for safe device handling.
Warns about electrical safety, especially regarding incorrect voltage supply.
Guides the user through connecting the device to a PC and IO-Link device.
Shows detailed wiring diagrams for USB and IO-Link interfaces.
To Next Page