4 Align the sensor with the object. Select the position so that the red emitted light
beam hits the center of the object. You must ensure that the optical opening (front
screen) of the sensor is completely clear [E]. We recommend making the adjust‐
ments using an object with a low remission.
Image: E
5
Image: F
Sensor with teach-in via pushbutton and / or cable:
The sensing range is adjusted by pressing the teach-in button or by activating the
teach function via cable. Do not operate the each-in button using sharp objects. We
recommend placing the switching state in the object, e. g., see graphic F. Once the
sensing range has been adjusted, the object is removed from the path of the
beam, which causes the background to be suppressed and the switching output to
change (see graphic C).
COMMISSIONING
3
8012136.YM43 | SICK
Subject to change without notice
3
To Next Page
Loading...
