Sicma SA 85 - Safety Labels; Operational Safety Warnings

Sicma S.p.A.
Miglianico (CH)
page 6
SAFETY LABELS
The safety labels and the information on the machine, listed in the following table, must be
necessarily carried out; failure to carry out these warnings can cause death or severe injuries. Make
sure that the labels are always present and legible, should this not be the case contact your nearest
SICMA dealer to replace the missing or illegible ones.
1
Attention: read carefully all
instruction and safety rules before
using the machine.
Stop engine and remove key
before starting maintenance or
repairs.
4
Use a 540 rpm power takeoff.
7
Hooking point for the machine’s lifting.
2
Danger of feet injuries: rotating
tools, keep away from the
machine.
5
Danger of feet injuries: keep a safety
distance from the machine.
3
Thrown objects: keep a safety
distance from the machine.
Danger of hands injuries: do not
open or remove safety guards
while the machine is operating.
6
Danger of hands injuries: keep safety
guards in position while operating.