Sicma S.p.A.
Miglianico (CH)
page 22
Adjustment of spring-loaded arm
resistance to obstacles
To adjust the spring-loaded arm
resistance to obstacles use return spring A
(picture 19) moving it rightwards on
hooking support B to decrease the arm
resistance to obstacles, vice versa leftwards
to increase resistance to obstacles.
These operations shall be made only on working ground and
only after having stopped the engine, disengaged the power
takeoff and pulled the parking brake. If necessary, lift the
machine from the ground but, in order to avoid risks for
people, place it on rests thus preventing any injuries that
might be caused by its sudden fall.
CUTTERS
Shredders can be equipped with different types of cutters or hammers according to the work to be
done:
All-purpose cutters: for grass, straw, and maize.
Straight cutters with counter cutters: for straw, wheat, extra fine mincing.
Hammers: for wood and shrubs.
Picture
19
To Next Page
Loading...
