Sicma TR 200 - Maintenance

Sicma S.p.A.
Miglianico (CH)
page 24
MAINTENANCE
Maintenance is a fundamental operation to extend life and performances of any agricultural vehicle;
taking care of the machine grants you not only a good work execution, but also a longer life of the
whole equipment and a greater safety on the workplace.
The operating times indicated on this manual have just an informative character and are referred to
normal conditions of use; they can thus undergo variations according to the type of service, to the
more or less dusty environment, to seasonal factors, etc
-
Before injecting lubricating grease into the nipples, clean
them accurately to prevent mud
, dust or other foreign
matters from mixing up with grease, thus diminishing the
lubrication effect
-
When making oil feed or change it is better to use the
same oil type, in order to avoid mixing oils with different
features.
- When executing maintenance a
ctivities, keep the machine
rested on the ground in horizontal position.
-
After the first working hours check that all bolts and nuts
are tightened strongly; remember also to check often all
the machine safety guards.