ECO FILTER – OPERATION AND MAINTENANCE MANUAL V 1.4 Page 4
1. Introduction
We congratulate with you for choosing a Sideros Engineering filtering system.
ECO model filters are used to abate and filter the fumes from the industrial thermal cutting of sheet metal,
which includes oxygen, plasma and laser cutting. They are also used to collect the fumes from welding and
the dusts generated by lapping and descaling metal objects. This product was conceived and designed in
response to the problem of air pollution; in fact the ECO model cartridge filter is able to effectively and
continuously suck and filter pollutants which would be otherwise dispersed in the atmosphere, thereby
collecting them conveniently for easier disposal operations.
In this manual, we gathered all necessary information to get maximum advantages from your system:
therefore we recommend you to carefully read the following pages. For further information or doubts, please
contact our Technical Department.
1.1. Manufacturer’s identification data
The ECO model filtering and dust collection system was designed, manufactured and marketed by:
Sideros Engineering
Via I Maggio, 69 – I Casoni –29027 Podenzano (PC)
Tel. (+39) 0523/524066 – Web: www.siderosengineering.com
E-mail: info@siderosengineering.com
To Next Page
Loading...