Need help?Do you have a question about the Siemens 1FT7 Series and is the answer not in the manual?
General| Cooling Method | Natural convection or forced ventilation |
|---|---|
| Protection Class | IP64, IP65 |
| Speed | Up to 9000 rpm |
| Voltage | 230 V, 400 V |
| Encoder | Incremental or absolute encoder |
| Shaft Height | 40 to 100 mm (depending on model) |
| Rated Speed | 2000 to 6000 rpm (depending on model) |
Discusses high motor surface temperatures and risks associated with hot surfaces.
Explains the usage for which the motors are designed and associated specifications.
Details the features and applications of the 1FT7 synchronous motors.
Outlines what is included with the motor delivery and reporting procedures for damage or deficiencies.
Explains the information presented on the motor's rating plate, including various technical specifications.
Lists technical features, construction types, cooling methods, and materials used in the motors.
Details available options like different protection types, fitted elements, and encoder systems.
Provides guidelines for safe handling, lifting, and storage of the motors to prevent damage.
Covers installation procedures, mounting, fixing screws, and tightening torques for motor mounting.
Discusses motor balancing, vibration response, and site conditions impacting vibration values.
Explains handling of output elements, shaft protection, and balancing requirements.
Warns about electric shock hazards and safety rules for electrical work on the motors.
Details cautions for motor damage, connection requirements, and EMC instructions.
Shows power and signal connection configurations and pin assignments for motor connectors.
Describes usage of plug sizes, PE conductor connection, and brake connection for power supply.
Details plug usage and assignment for encoder and temperature sensor signals.
Explains the DRIVE-CLiQ interface, sensor module, and RJ45plus socket for motor communication.
Describes how to turn the sensor module and its torque and rotational limits.
Lists essential checks required before initiating motor startup and operation.
Outlines the step-by-step process for commissioning the drive system and motor.
Provides guidelines for bearing service life, radial shaft seals, and encoder replacement.
To Next Page