Need help?Do you have a question about the Siemens 1FT7 and is the answer not in the manual?
Explains the manual's warning notice system, including danger grading and safety alert symbols.
Defines qualified personnel responsible for operating and maintaining the product.
Notes on correct Siemens product usage and adherence to environmental conditions.
Describes the content, purpose, and scope of the operating instructions manual.
Explains the formatting conventions used for instructions, lists, and notes in the document.
General safety rules and precautions for converter-fed low-voltage three-phase motors.
Safe use of electrical machines, personnel responsibilities, and system safety requirements.
Details the five critical safety rules to be observed before performing maintenance.
Warning about high motor surface temperatures and the risk of burns.
Discusses hazards of electromagnetic fields and necessary protective measures.
General overview of 1FT7 synchronous motors, their design, and applications.
Comprehensive list of technical specifications, including insulation, cooling, and protection.
Details on motor connection types, options, and specific features like brakes.
Explanation of the data presented on the motor's rating plate, including position and meaning.
Lists relevant IEC/EN standards, directives, and UL regulations for motor compliance.
Describes the different construction types (IM B5, IM V1, IM V3) for the motors.
Specifies the IP ratings for motors and associated forced-ventilation fans.
Permissible temperature ranges for operation and storage, and power derating factors.
Details on the natural cooling method, including rated data and minimum clearance requirements.
Explains the forced ventilation system, required clearances, and associated safety notices.
Information on water cooling connections, technical data, and coolant specifications.
Specifies water quality parameters for coolant, including ions, pH, and hardness.
Specifies sound pressure levels for motors based on cooling method and shaft height.
Steps for checking delivery completeness and reporting transport damage or defects.
Guidelines for safely transporting the motor using appropriate lifting devices and observing regulations.
Recommendations for indoor storage to prevent bearing damage and maintain motor integrity.
General installation guidelines, precautions for sensitive parts, shaft extension, and mounting checks.
Instructions for fitting and removing output elements like couplings, gears, and pulleys.
Details on vibration severity grades (A and R) and factors influencing vibration response.
Instructions for connecting the motor to the water cooling circuit.
Safety warnings for electrical connections, covering shock hazards and electrostatic discharge.
Provides the circuit diagram for wiring and connecting the motor windings.
Guidelines for connecting the motor to converters, including cable selection and EMC.
Illustrations and descriptions of power and signal connector types and configurations.
Tables showing cable current ratings and derating factors based on temperature.
Instructions and limitations for rotating power and signal connectors for proper connection.
Describes motors with DRIVE-CLiQ interface and their signal connection requirements.
Explains connection procedures for motors not equipped with the DRIVE-CLiQ interface.
Instructions on how to connect the temperature sensor to the signal connector.
Details on connecting the motor's separately driven forced ventilation fan.
Guidelines for selecting and connecting shielded cables to a converter for motor operation.
Essential checks for mechanical and electrical installation prior to commissioning the system.
Verification of electrical connections, grounding, brake, and monitoring functions.
Ensuring correct installation and operation of the forced ventilation unit.
Verification of water supply connection and circulation parameters for water-cooled motors.
Ensuring the proper release and engagement function of the optional motor brake.
Steps and cautions for switching on the motor, including converter parameter assignment.
Warnings about removing covers, handling faults, and risks of burns during operation.
Lists common motor faults and their potential causes, referencing a key table.
Provides specific remedies and corrective actions for identified motor faults.
Measures for motors at standstill and warnings about damage from improper storage.
Safety warnings regarding electrical shock and burns during maintenance activities.
General guidelines and specific intervals for regular inspection and maintenance tasks.
Specifies intervals for bearing replacement based on operating hours and conditions.
Safety guidelines for qualified personnel and precautions for transportation during maintenance.
Step-by-step guide for safely removing and installing the motor encoder.
Ensuring correct motor data is programmed into new DRIVE-CLiQ encoders.
Steps for preparing the machine for disassembly, including safety rules.
General procedures for safely dismantling the motor, including warnings about falling parts.
Recommendations for sorting and recycling various motor components.
Guidelines for sorting and recycling process materials and chemicals used with the motor.
Lists the order numbers (MLFB) for the 1FT7 Synchronous Motors configuration manuals.
Information on how to locate and contact Siemens service partners worldwide.
Official statement confirming the product's conformity with relevant European directives.
To Next Page
General