1FT7 synchronous motors
Operating Instructions, 04/2010, 610.40075.40b
53
Decommissioning and disposal
10
10.1 Decommissioning
10.1.1 Preparing for disassembly
Disassembly of the machine must be carried out and/or supervised by qualied personnel
with appropriate expert knowledge.
1. Contact a certified waste disposal organization in your vicinity. Clarify what is expected in
terms of the quality of dismantling the machine and provision of the components.
2. Follow the five safety rules.
3. Disconnect all electrical connections.
4. Remove all liquids such as oil, water, …
5. Remove all cables.
6. Deatch the machine fixings.
7. Transport the machine to a suitable location for disassembly.
Refer also to the information in the section headed "Maintenance".
10.1.2 Dismantling the motor
Dismantle the machine using the general procedures commonly used in mechanical
engineering.
WARNING
Machine parts can fall
The machine is made up of heavy parts. These parts are liable to fall during dismantling.
This can result in death, serious injury, or material damage.
Secure the machine parts being dismantled to prevent them falling.
The motors must be disposed of in accordance with national and local regulations as part of
the standard recycling process or they can be returned to the manufacturer.
To Next Page
Loading...
