Servicing
9.2 Corrective maintenance
1FT7 synchronous motors
52 Operating Instructions, 04/2010, 610.40075.40b
Motors with DRIVE-CLiQ
NOTICE
Motor data (electronic rating plate)
You must ensure that the new encoder contains the correct motor data. If it does not, the
motor may perform uncontrolled motions, leading to considerable material damage.
You can purchase a preprogrammed encoder module from the Siemens Service Center by
quoting the relevant order number and serial number. If your encoder module is not
preprogrammed, it must be programmed with the correct motor data prior to use.
To Next Page
Loading...
