Siemens 1FT7 - Corrective Maintenance Safety

Servicing
9.2 Corrective maintenance
1FT7 synchronous motors
50 Operating Instructions, 04/2010, 610.40075.40b
9.2 Corrective maintenance
9.2.1 Safety guidelines
Qualified personnel
This machine must be commissioned and operated by qualified personnel only. For the
purpose of the safety information in these Operating Instructions, a "qualified person" is
someone who is authorized to energize, ground, and tag equipment, systems, and circuits in
accordance with established safety procedures.
Safety notes
WARNING
Rotating or live parts
Rotating or live parts are dangerous. Death, serious injury, or material damage can result if
the required covers are removed or if the device is not operated properly.
Before starting work on the motor and, in particular, before opening the covers of live parts,
make sure that the motor or system is properly isolated.
WARNING
Transportation in accordance with proper procedures
Only transport the motor in accordance with the transport guidelines. Death, serious injury,
or material damage can result if the motor is not transported properly.
Whenever you have to transport the motor, follow the instructions provided in the section
"Transport and storage".