Safety notes
WARNING
Electrical machines have hot surfaces.
Hot surfaces
operated, or maintained properly.
using methods that comply with regulations.
Fatal or severe injuries and substantial material damage can occur if
the required covers are removed or if the machines are not handled,
● Allow the machine to cool before starting work on it.
● Only remove covers
● Operate the machines properly.
This documentation only contains the instruc
personnel who are using the machines in ac
tions that will be required by qualified
cordance with their intended purpose.
Those responsib fety must ensure the following:
● The basi k for the system and all work relating to transportation,
assemb nd repairs is carried out by
qualifie
● The oper
● The tech nt
and oper unt at all times.
● d.
●
● ualified persons is prohibited.
by the appropriate
le for plant sa
c planning wor
l
d
y, installation, commissioning, maintenance a
personnel and checked by responsible, suitably skilled personnel.
ating instructions and machine documentation are always available.
nical data and specifications relating to installation, connection, ambie
ating conditions are taken into acco
The system-specific installation and safety regulations are observe
Personal protective equipment is used.
Work on or in the vicinity of these machines by unq
● If the machines are used outside industrial areas, the installation site must be
safeguarded against unauthorized access by means of suitable protection
facilities (e.g. safety gates) and appropriate warning signs.
Qualified personnel
All work on the machine must be carried out by qualified personnel only. For the
purpose of this documentation, qualified personnel is taken to mean people who fulfill
following requirements: the
● Through appropriate training and experience, they are able to recognize and
avoid risks and potential dangers in their particular field of activity.
● They have been instructed to carry out work on the machine
person responsible.
Note
Siemens Service Center
Use the services and support provided by the Siemens Service Center for
planning, installation, commissioning, and servicing work.
Standard machines_Operating_Instructions_Compact
2 56100000002001 EN, 01/2010
To Next Page
Loading...
Need help?
General