– 6 –
- English -
19.04.2000
euroset 2010,IM1, A31008-E2010-B100-2-3S19
2010-
❏
Mute
You can deactivate the telephone handset and microphone during a call.
Neither you nor the called party will hear each other. The connection is
maintained and is indicated by the playing of music on-hold.
❏
Setting the handset volume
There are 2 handset volume settings (factory setting: level 1).
❏
Activating/ deactivating the key confirmation tone
A “confirmation tone” is activated as an acoustic check that the telephone
has registered each individual key pressed. You can activate and deacti-
vate the confirmation tone as you require:
❏
Locking/ unlocking the telephone
Call numbers cannot be dialed when the telephone is locked, however in-
coming calls can be received.
Operation at private PABXs
❏
Entering/deleting exchange codes
If you are using your telephone on a private PABX, you may need to store
one or more exchange codes. A dialing pause of 3 seconds is automatically
set when the exchange code is saved.
L
Press the mute key during the call.
To reactivate the handset and microphone:
Press the key again.
>"
Lift the handset, then start the function.
or
1 =Soft,
2 = Loud.
"<
Press the set key, then replace the handset.
>"
Lift the handset, then start the function.
or
0 = Confirmation tone off,
1 = Confirmation tone on.
"<
Press the set key, then replace the handset.
>"
Lift the handset, then start the function.
or
1 =Lock,
0 = Unlock
"<
Press the set key, then replace the handset.
>"/
Lift the handset then start the function.
"<
(a) To ddelete all exchange codes:
Press the set key and replace the handset.
J
(b) To eenter an exchange code:
Enter a one- to three-digit exchange code.
/J
If you want to enter another exchange code:
Press the redial key and enter the next exchange
code.
"<
Press the set key, then replace the handset.
To Next Page
Loading...
Need help?
General