Transport, storage and packing
14 9229 9992 176 0D
2013-07-08
• Unscrew all the screws from the side walls.
• Take the supports out of the transport unit.
• Remove the side walls.
• Remove accessory pack and store safely in the packaging for later attachment.
• Remove foil.
• Check the vacuum circuit-breaker 3AH37/38 for damage.
• Undo tensioning belts, if applicable.
Fig. 16 Removing the supports Fig. 17 Removing the side walls
Fig. 18 Taking out the accessory pack Fig. 19 Removing the foil
To Next Page
Loading...
