Transport, storage and packing
9229 9992 176 0D 5
2013-07-08
Transport, storage and packing
Transport
Transport weight Refer to the delivery slip for the weight of the transport unit.
Place the transport unit on a level, non-slip and pressure-resistant surface for
intermediate storage.
Transport vacuum circuit-breaker in the original transport unit up until the installation
site or storage location.
Transporting with crane or fork lift
WARNING
Heavy transport weight
Transport unit may fall and fail and sling gear may break.
Use lifting gear, transporting and sling gear suited to the requirements and load-
carrying capacity. Observe transport symbols.
Note
Observe stacking heightFor transport, not more than three constructionally
identical transport units must be piled on top of each other.
Observe loads specified on the transport unit.
Note
Secure loadFor transport, secure the load in such a way that the transport unit
is not at risk.
Fig. 1 Transporting the pallet with carton (I) Fig. 2 Transporting the wooden case (III)
To Next Page
Loading...
