Siemens 3RU2116 8K Series

SIRIUS 3RU2116...8K
3RU2126...8K
DE
Überlastrelais S00 / S0
ES
Relé de sobrecarga S00 / S0
TR
Aşırı akım rölesi S00 / S0
EN
Overload Relay S00 / S0
IT
Relè di sovraccarico S00 / S0
РУ
Реле перегрузки S00 / S0
FR
Relais de surcharge S00 / S0
PT
Relé de sobrecarga S00 / S0
中文
过载继电器 S00 / S0
A5W00739538A/RS-AA/001 Last update: 08 January 2024
s
Betriebsanleitung
DE
Operating Instructions
EN
Instructions de service
FR
Instructivo
ES
Istruzioni operative
IT
Instruções de Serviço
PT
İşletme Kılavuzu
TR
Руководство по эксплуатации
РУ
使用说明
中文
Technical Assistance:
Telephone: +49 (911) 895-5900 (8°° - 17°° CET) SIEMENS AG
Fax: +49 (911) 895-5907 Technical Assistance
E-mail: technical-assistance@siemens.com
Breslauer Str. 5
Internet: www.siemens.com/sirius/technical-assistance
D-90766 Fürth
DE
GEFAHR
Gefährliche Spannung. Lebensgefahr oder schwere Verletzungsgefahr.
Vor Beginn der Arbeiten Anlage und Gerät spannungsfrei schalten.
EN
DANGER
Hazardous voltage. Will cause death or serious injury.
Turn off and lock out all power supplying this device before working on this device.
FR
DANGER
Tension dangereuse. Danger de mort ou risque de blessures graves.
Mettre hors tension avant d’intervenir sur l’appareil.
ES
PELIGRO
Tensión peligrosa. Puede causar la muerte o lesiones graves.
Desconectar la alimentación eléctrica antes de trabajar en el equipo.
IT
PERICOLO
Tensione pericolosa. Può provocare morte o lesioni gravi.
Scollegare l’alimentazione prima di eseguire interventi sull’apparecchiatura.
PT
PERIGO
Tensão perigosa. Perigo de morte ou ferimentos graves.
Desligue a alimentação elétrica e proteja contra o religamento, antes de iniciar o trabalho no equipamento.
TR
TEHLİKE
Tehlikeli gerilim. Ölüm tehlikesi veya ağır yaralanma tehlikesi.
Çalışmalara başlamadan önce, sistemin ve cihazın gerilim beslemesini kapatınız.
РУ
ОПАСНОСТЬ
Опасное напряжение. Опасность для жизни или возможность тяжелых травм.
Перед началом работ отключить подачу питания к установке и к устройству.
中文
危险
危险电压。 可能导致生命危险或重伤危险。
操作设备时必须确保切断电源。
!
!
!
!
!
!
!
!
!
https://support.industry.siemens.com/cs/my/src?lc=en-IN
SIEMENS AG
Technical Support
https://sieportal.siemens.com/en-IN/home
Support Request

Siemens 3RU2116 8K Series Specifications

General

Size of overload relay	S00
Phase-failure sensitivity	Yes
Ambient Temperature	-20 °C to +60 °C
Mounting Type	screw and snap-on mounting onto 35 mm standard mounting rail
Protection Class	IP20
Number of NC contacts for auxiliary contacts	1
Number of NO contacts for auxiliary contacts	1
Product type designation	3RU21
Voltage Rating	690 V
Rated Operational Voltage	690 V
Rated Insulation Voltage	690 V
Operating voltage rated value	690 V
Trip class	CLASS 10
Type of electrical connection of main circuit	Screw Connection
Utilization Category	AC-3
Standards	IEC 60947-4-1

Summary

General Safety Warnings

Hazardous Voltage Alert

Warning about hazardous voltage, indicating danger of death or serious injury. Requires power lockout.

Device Assembly

Assembly Instructions

Step-by-step instructions and diagrams for assembling the overload relay unit.

Device Disassembly

Disassembly Instructions

Step-by-step instructions and diagrams for safely removing the overload relay unit.

Device Settings and Operation

Operational Settings

Information on configuring device settings and operational parameters.

Sealing and Tamper Protection

Procedure for sealing the device to ensure tamper-proofing.

Remote Reset Functionality

Details on how to perform a remote reset of the device.

Electrical Wiring and Connections

Connection Terminals and Wiring

Guidance on connecting wires, terminal specifications, and torque values.

Specific Safety Requirements

Ring Terminal Safety and Insulation

Essential safety guidelines for using ring terminals and required insulation.

Circuit Diagrams and Schematics

Electrical Circuit Schematics

Illustrations of the electrical circuits and connection diagrams for the device.

Mounting and Installation

Device Mounting Positions

Information and diagrams detailing correct mounting orientations for the device.

Dimensional Specifications

Device Dimension Drawings

Detailed dimension drawings and physical specifications for various product models.