Siemens 7KT0310 - Safety Precautions

SACHIN ENTERPRISE
These instructions do not purport to cover all details or variations in
equipment, or to provide for every possible contingency in connection
with installation, operation, or maintenance. Should additional
information be desired, please contact the local Siemens sales ofce.
The contents of this instruction manual shall not become part of or
modify any prior or existing agreement, commitment, or relationship.
The sales contract contains the entire obligation of Siemens. The
warranty contained in the contract between the parties is the sole
warranty of Siemens. Any statements contained herein do not create
new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identied by ® are
registered trademarks of Siemens AG or Siemens Industry, Inc. The
remaining trademarks in this publication may be trademarks whose
use by third parties for their own purposes could violate the rights of
the owner.
Safety Precautions
All safety related codications, symbols and instructions that
appear in this operating manual or on the equipment must
be strictly followed to ensure the safety of the operating
personnel as well as the instrument.
If the equipment is not used in a manner specied by the
manufacturer it might impair the protection provided by the
equipment.
• Do not use the equipment if there is any mechanical
damage.
• Ensure that the equipment is supplied with correct
voltage.
CAUTION:
1. Read complete instructions prior to installation and
operation of the unit.
2. Risk of electric shock.
3. The equipment in its installed state must not come in
close proximity to any heating sources, oils, steam, caustic
vapors or other unwanted process by products.
For demounting the meter
Pull the arm of the sliding clamps in outward
direction (opposite to meter) and drag the
sliding clamps away from the panel.
Dis-assemble the snap tted base clamps from
the meter using a screw-driver
Push the meter from back side out of the panel
window and remove the gasket from the meter