SITRANS P300 (7MF8.23.. 7MF8.24.. 7MF8.25..)
A5E03434759-01, 08/2011
5
WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
● Do not use any damaged or incomplete devices.
Nameplate layout
Overview
The nameplate bearing the Order No. and other important information, such as design details and technical data, is on the
enclosure.
,,*([Q/,,&777
3('6(3
,3
' .DUOVUXKH
6,75$163
0DGH LQ )UDQFH
)1U
): +:
0)%$%$=
① Product name/manufacturer ⑧ Group (gas, dust)
② Product information ⑨ Maximum surface temperature (temperature
class)
③ Technical data ⑩ Hardware identifier
④ Certification information ⑪ Firmware identification
⑤ Characteristics for hazardous area ⑫ Order No. (machine-readable product code)
⑥ Category for operating area ⑬ Serial number
⑦ Type of protection
Figure 1 Example of nameplate: Product and approval information
FW: aa.bb. cc Firmware for HART
aa. Device type
bb. Document revision
cc FW edition
FW: aaaa.bb. cc Firmware for PROFIBUS
aaaa. Profile revision (0300 = 3.00)
bb. Document revision
cc FW edition
HW: xx. yy. zz Hardware
xx Serial number
yy. Connection board product version
zz Compatibility mark
Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
To Next Page
Loading...
