7SG11 Argus 8 Installation
4.3 Communications
ST fibre optic connections – 2 per relay.
(Refer to Section 4 of this manual – Communications Interface).
5 Ancillary equipment
The relay can be interrogated locally or remotely by making connection to the fibre optic terminals on the rear
of the relay. For local interrogation a portable PC with a fibre to RS232 modem (Sigma 4) is required. The PC
must be capable of running Microsoft Windows Ver 3.1 or greater, and it must have a standard RS232 port in
order to drive the modem. For remote communications more specialised equipment is required. Refer to
Section 4 of this manual – Communications Interface.
©2011 Siemens Protection Devices Limited Chapter 6 Page 4 of 6
To Next Page
Loading...
