Siemens 7SG11 - Figure 5 - Display Menu Structure; Maintenance

7SG11 Argus 8 Description of Operation
RELAY IDENTIFIER
VA = 63.55 KV
VB = 63.47 KV
SETTINGS
MODE
INSTRUMENTS
MODE
FAULT DATA
MODE
SYSTEM CONFIG
MENU.  TO VIEW
NEUTRAL VOLTAGE
MENU.  TO VIEW
NPS OVERVOLTAGE
MENU.  TO VIEW
FREQUENCY
MENU.  TO VIEW
O/P RELAY CONFIG
MENU.  TO VIEW
VC = 63.52 KV
Va = 63.42 V
Vb = 63.34 V
Vc = 63.49 V
Vo = 0.020 V
Frequency
50.003 Hz
Relay Status
1_1111____1
Status Inputs
1_1_1
General Alarms
No Alarms Raised
Date = 02/05/99
Time = 11:14:34
V Starters
VE1 VE4
FAULT 1
FAULT 10
LED TEST
FAULT DATA
DISPLAY
VOLTAGE
MENU.  TO VIEW
G1
G8
G1
G8
G1
G8
G1
G8
G1
G8
CANCEL FAULT
NOTE : THE ARROWS IN THE DIAGRAM
REPRESENT THE KEY PRESSES REQUIRED
TO NAVIGATE THE MENU SYSTEM.
READ UP
READ DOWN
TEST/RESET
ENTER
CANCEL
V1 = 63.55 V
V2 = 0.03 V
RESET WAVEFORMS STORED
RESET EVENTS STORED
CB MAINTENANCE
MENU.  TO VIEW
V2 Starters
V2E1
Vo Starters
3VoE2
F Starters
FE1 FE2
STATUS CONFIG
MENU.  TO VIEW
G1
G8
RESET TRIP COUNTER
COMMS INTERFACE
MENU.  TO VIEW
Waveforms
5
Events Stored
237
Trip Counter
128
NOTE : THE SETTING SUBMENUS ABOVE
ARE NOT ALWAYS VISIBLE. THEY ARE
DEPENDENT UPON RELAY TYPE AND
VARIOUS CONFIGURATION OPTIONS.
DATA STORAGE
MENU.  TO VIEW
G1
G8
Power On Count
7
Figure 5 - Display Menu Structure
©2011 Siemens Protection Devices Limited Chapter 1 Page 20 of 20