Need help?Do you have a question about the Siemens 7SR105 Rho and is the answer not in the manual?
General| Rated Frequency | 50/60 Hz |
|---|---|
| Operating Temperature | -25°C to +55°C |
| Voltage Supply | 24-250 V DC / 48-265 V AC |
| Rated Current | 1 A or 5 A |
| Protection Functions | Overcurrent, Earth Fault |
| Communication Interface | RS485 |
| Protocols | Modbus RTU, DNP3 |
| Mounting | DIN rail |
| Storage Temperature | -40°C to +70°C |
Provides an overview of the relay's functionality and purpose.
Details the physical components and modules of the relay.
Explains the various protection algorithms and their settings.
Covers the monitoring and supervisory features of the relay.
Describes motor start/stop, user logic, and other control functionalities.
Details data communications, CB maintenance, data storage, and metering.
Explains the symbols and terminology used throughout the document.
Outlines critical safety measures for installation and operation.
Lists available variants and configurations for ordering.
Provides a block diagram of the relay's internal functions.
Shows the physical terminal connections for wiring the relay.
Introduces the relay's menus, display structure, and operating modes.
Guides users on connecting and configuring the relay via software.
Explains how to access and interpret fault records stored in the relay.
States compliance with relevant directives and standards.
Details the relay's electrical, communication, and mechanical specifications.
Outlines environmental test conditions and requirements.
Provides detailed settings and tolerance limits for protection functions.
Describes communication interfaces and protocols used by the relay.
Details the physical ports (USB, RS485) and connection methods.
Explains the IEC 60870-5-103 protocol implementation and data points.
Details the MODBUS-RTU protocol implementation and register data types.
Explains the DNP3 protocol, device profile, and point lists.
Covers DNP3 implementation settings like unsolicited mode and timeouts.
Provides step-by-step instructions for installing the relay physically.
Illustrates how to connect temperature sensors to the relay.
Offers guidance on product disposal and environmental compliance.
Lists common problems and their recommended solutions for the relay.
Provides an overview of plant design principles related to motors.
Guides on applying and setting protection functions for motors.
Details CT ratio selection and requirements for protection applications.
Explains the application of supervision functions like 50BCL, 81B, 60CTS, etc.
Covers user-defined logic and motor start/stop control examples.
Provides function and connection diagrams for common applications.
To Next Page
