Siemens 8 Series - Basic settings; Changing settings

Basic settings en
57
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the HomeConnect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
HomeConnect functions for use and
is only required when you want to
use the HomeConnect functions for
the first time.
Note:Please note that the
HomeConnect functions can only be
utilised with the HomeConnect app.
Information on data protection can be
retrieved in the HomeConnect app.
14 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
14.1 Changing settings
1. Select "Settings".
a The display shows the list of set-
tings.
2. Change the required setting.
a The appliance saves the setting
automatically.
3. To go back to the menu, press ⁠.
4. To exit the settings, press ⁠.
Tip:To call up brief information,
press ⁠.
14.2 Overview Settings
See here for an overview of the "Settings".
Language Set language.
HomeConnect HomeConnect assistant
→"Setting up
HomeConnect",
Page55
Time Set the current time or
automatically display via
HomeConnect.
Display settings Brightness Set the brightness in
steps.
Night-time dimming Switch display dimming
on and off.
1
Depending on the appliance specifications