To Next PageTo Next Page
Need help?Do you have a question about the Siemens SIMATIC S7-1200 CP 1243-8 IRC and is the answer not in the manual?
General| Product Type | Communication Processor |
|---|---|
| Series | SIMATIC S7-1200 |
| Model | CP 1243-8 IRC |
| Data Transfer Rate | 10/100 Mbps |
| Power Supply | 24 V DC |
| Mounting | DIN rail |
| Dimensions (W x H x D) | 45 mm x 100 mm x 75 mm |
| Digital Inputs Quantity | 0 |
| Digital Outputs Quantity | 0 |
| Supported Protocols | ISO-on-TCP |
| Interface | Ethernet |
| IP Addressing | Static, DHCP |
| Configuration | STEP 7 Basic/Professional |
| Operating Temperature | -20°C to +60°C |
| Weight | Approx. 200 g |
Provides essential security guidelines for protecting plants and systems against cyber threats.
Details the CP's capabilities, supported telecontrol protocols, and communication partners.
Describes supported communication services like telecontrol, SMS/e-mail, and inter-station communication.
Covers communication via SINEMA Remote Connect, including setup and parameter groups.
Details security functions for telecontrol protocols and configurable security features.
Covers safety notices, overvoltage protection, and hazardous area usage guidelines.
Provides step-by-step instructions for mounting, wiring, and setting up the module.
Provides general and physical security recommendations to prevent unauthorized access.
Lists the necessary STEP 7 software products and versions for configuring the CP.
Guides through the configuration process of the CP using STEP 7 Basic.
Details the configuration steps for telecontrol communication using SINEMA Remote Connect.
Covers WAN settings, CP identification, Ethernet addresses, and advanced options for the Ethernet interface.
Explains serial interface configuration, including modem types, AT strings, and dial-up network settings.
Details partner configuration for ST7 and DNP3/IEC data points, including importing data.
Explains communication parameters with the CPU, including scan cycle and diagnostics.
Covers security user creation, MSC authentication, DNP3 security, firewall, and e-mail configuration.
Guides on creating single and redundant telecontrol connections for ST7 communication.
Explains data point configuration, syntax, types, triggers, and processing options for ST7, DNP3, IEC.
Lists supported program blocks for Open User Communication (OUC) like TSEND, TRCV, TCON.
Details available diagnostics options: LEDs, SMS/e-mail, STEP 7 diagnostics, and Web server diagnostics.
Provides methods for downloading new firmware versions to the CP via memory card, STEP 7, or Web server.
Lists detailed technical specifications, including article number, Ethernet properties, and power supply data.
Details the TS modules, including structure, types (Modem, ISDN, RS232, GSM), and adapters.
Describes dedicated line, dial-up modems (MD2, MD3, MD4), and SCALANCE M routers.
