Programming the telephone settings
38
kap01.fm5
27.11.98
Profiset 30isdn engl.: A30853-X300-B107-1-7619
Activating/deactivating the display of your own call number
You must apply to your local network operator for this fea-
ture. Inquire about the respective charges.
You can temporarily suppress the display of your call
number on another party’s display.
Enter 0 or 1 to deactivate or activate the display of your
own call number:
● “0“ the display of your own call number is
supressed to other call participants
● “1“ the display of your own call number is permitted
to other call participants
In the as-supplied condition, the display of your own call
number is activated.
Enabling/disabling call waiting
You can set whether or not incoming calls are to be sig-
nalled during a call. You must apply to your local network
operator for this feature. Inquire about the respective
charges.
Enter 0 or 1 to disable or enable call waiting:
● “0“ Call waiting is disabled
● “1“ Call waiting is enabled
In the as-supplied condition, call waiting is enabled.
a
Handset is on-hook.
S03
Start the programming procedure.
0 or 1
Press key 0 or 1.
S
Save the setting.
a
Handset is on-hook.
S07
Start the programming procedure.
0 or 1
Press key 0 or 1.
S
Save the setting.
To Next Page