The following active ingredient classes can be used:
Active ingredient class Cleaning agents and disinfectants
Aldehyde Incidin Perfekt
Alkylamine Lysoformin Plus
Chlorine derivates Clorina
Commercially available dishwashing
liquid
Tempo, Fairy Ultra, Palmolive
Guanidine derivates Biguacid S
Organic acids Apesin SDR san
Quaternary compounds Oasis Pro
Peroxides Sanosil
Pyridine derivates Bacoban WB
The following products should not be used:
◾ All alcohol-based products
◾ All chlorine-releasing products
◾ Benzine / phenole-based products
◾ Products: Banicide Advanced, Wavicide, Terralin, Cidex OPA
Instructions for cleaning and disinfection
Sprays can penetrate the interior of equipment.
It can cause damage to electronic components and the formation of
flammable mixtures of air/solution vapor.
Use gloves to avoid infection.
1 Before cleaning the system, block radiation and block unit movements.
( Page 228
Blocking radiation)
( Page 229 Blocking unit movements)
2 Use a lukewarm detergent solution and a soft cloth to remove slight
contamination.
3 Clean all contaminated parts and all parts which may or have come into
contact with the patient.
4 Remove contrast medium spots best of all with warm water.
5 Remove major contamination first with a cloth soaked in alcohol, then wipe
off with clear water.
6 After using disinfectants, always wipe off with clear water.
2.4.4
2 Safety
42
Operator Manual
Print No. AXA4-100.620.17.01.02
To Next Page
Loading...
