EasyManua.ls Logo

Siemens Artis Q - Page 3

Siemens Artis Q
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Active ingredient class Tested cleaning agents and disinfec-
tants
Additional examples
Disinfectants Taski DS5001
(Diverseylever Labs)
Morning Mist
Surfanios Fraicheur Citron
(Anios Labs)
Guanidine derivates Lysoformin
Quaternary compounds Incidur spray, full strength
Commercially available dishwashing
liquid
Tempo Fairy Ultra, Palmolive
Benzine Petroleum ether
Pyridine derivates Active Spray, full strength
Water Tap water
Distilled water
Special instructions for all LCD displays, Large Display, and for
Artis Cockpit only
LCD displays are very sensitive to mechanical damage.
Avoid scratches, bumps, etc.
LCD displays are very sensitive to liquids.
Longer contact with the liquids can cause discoloration or can leave
calcium residue on the surface.
Droplets that run down between the panel and the frame can cause
damage or total failure of the panel!
1 If possible, immediately clean any droplets of liquid.
2 If a cleaning agent is sprayed directly on the display surface, make sure that
any droplets that run down are wiped off with a microfiber cloth before they
reach the edge of the panel.
3 If the front of the panel is soiled, clean it with a microfiber cloth and, if
necessary, with a glass cleaning agent. Clean housing parts with a cleaning
agent for plastics only.
Cleaning agents for all other system parts
Some substances contained in disinfectants are known to be hazardous to
health. Their concentration in the air must not exceed the legally defined
limit.
Always follow the manufacturer's instructions when using the disinfectants.
2.4.2
2.4.3
Safety 2
Artis Q/zeego/Q.zen | VD11 and higher
41
Print No. AXA4-100.620.17.01.02

Related product manuals