To Next PageTo Next Page
Need help?Do you have a question about the Siemens ARCADIS Orbic 3D and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | ARCADIS Orbic 3D |
| Category | Medical Equipment |
| Language | English |
Explains the structure of task cards, menu bar, tabs, subtask cards, and status bar.
Identifies key components of the C-arm system, such as image intensifier and X-ray tube.
Explains the operation of the steering lever and locking brake for C-arm movement.
Steps for connecting, powering on, and booting the C-arm system.
Instructions for applying sterile covers to the C-arm system.
Process of entering patient information into the registration window.
Steps for selecting the medical application area and program.
How to select the desired operating mode for the C-arm.
How to release radiation using the footswitch for fluoroscopy.
How to release radiation using the hand switch.
Describes the display of accumulated fluoroscopic time and dose.
Explains how to use ADR stop and manually set radiation parameters like kV.
Describes the use of the iris diaphragm for concentric collimation.
Explains the function of the semitransparent diaphragm for density compensation.
How single exposure images are automatically saved.
Manual saving of images in different operating modes.
Procedures for ending an examination and data handling.
Steps to prepare and trigger a subtraction scene, including contrast injection.
How to align mask and fluoroscopy images using pixelshift.
Process of starting the test run and using the collision check dialog.
Steps for performing the 3D scan, including C-arm movement and footswitch operation.
Steps to load reference and model series for image fusion.
Functions for sending, receiving, and confirming storage of patient images.
Querying worklists and loading patient data from an information system.
Providing feedback on work process status to an information system.
Searching for images in the network and importing them.
Archiving or sending patient images to information systems or workstations.
Selecting a patient from the scheduler in the Patient Browser.
Transferring patient data to the Examination task card to start an exam.
Procedures for completing MPPS dialog after an examination.
Starting a query to an information system to display existing images.
Importing images from the information system into the local database.
Setting up C-arm and navigation system, entering patient data, and establishing communication.
Releasing radiation, checking image quality, and confirming image selection for navigation.
