ARCADIS Orbic Quick Guide
124
NaviLink 2D/3D
Communication is implemented either
directly between the C-arm and the naviga-
tion system or through a hospital network.
In the first case, the network cable from the
C-arm is connected directly to the naviga-
tion system. In the second case it is
plugged into the network socket in the OR
room.
In connection with the NaviLink 3D option,
the calibration of the system should be
checked at least every six months together
with the navigation system used. If neces-
sary, a new calibration must be performed.
To Next Page
Loading...
Need help?
General
