ARCADIS Orbic Quick Guide
3D option
77
Generating radial images
✧ Click on the Radial Ranges button (1).
✧ In the Radial Ranges dialog, enter the
image thickness, angle between images
and number of images (2).
✧ Click Start.
➭ The new range is shown in the output
segment.
Generating curved cuts
✧ Click the Curved Mode button (3).
✧ Using the mouse, draw the required cut
line in the reference image (4).
✧ End the line with a double click.
➭ The reconstructed slice image is shown in
the output segment (5).
To Next Page
Loading...
