30
645
Configurazione uscita analogica % di carico
(valore fabbrica = 0)
0 = DC 0..10 V
1 = DC 2..10 V
2 = DC 0/2..10 V
Configuration of analog output (default value
= 0)
0 = DC 0..10 V
1 = DC 2..10 V
2 = DC 0/2..10 V
OEM / Service
LMV27
xx
ATTENTION: as for SQM3x actuators, set the direction according to the acutator function. As far as SQN1x actuators, set
always the counterclockwise direction, independently from the model chosen for the specific function.
To Next Page
Loading...
