Need help?Do you have a question about the Siemens XC1005-A and is the answer not in the manual?
General| Manufacturer | Siemens |
|---|---|
| Model | XC1005-A |
| Supply voltage | 24 V DC |
| Digital inputs | 8 |
| Protection Class | IP20 |
| Communication interface | RS485 |
| Operating Temperature Range | -20°C to +60°C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Housing Material | Plastic |
| Mounting | DIN rail |
Explains pictograms indicating danger severity and consequences.
Outlines general safety rules for installation and maintenance.
Lists standards and directives the product adheres to.
Explains the procedure for connecting the main power supply.
Details how to connect the 12V batteries for power supply.
Provides formula and examples for calculating battery capacity.
Covers wiring for detectors and manual release controls.
Specifies wiring requirements for hazardous environments.
Explains the connection and function of monitored inputs.
Describes the connection and use of control inputs.
Details the technical data for monitored control outputs.
Explains the use of programmable driver and relay outputs.
Details the 24V power supply output and protection.
Covers connection of repeater terminals and displays.
Explains programming options and their effects on outputs.
Details country-specific and factory presetting options.
Configures pre-discharged warning and activation times.
Covers programming for sounders, remote transmission, monitored outputs, and inputs.
Configures reset, operation modes, faults, and control inputs.
Manages detection zones, access levels, multi-sector, and repeaters.
Configures fire dampers, warning times, and discharge operations.
Step-by-step guide for powering up the control unit.
To Next Page
