Need help?Do you have a question about the Siemens CC62P and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | CC62P |
| Category | Gas Detectors |
| Language | English |
Details the physical characteristics, keypad, and display of the Siemens CC62P system.
Lists the various toxic and explosive gases the system is designed to detect.
Describes the availability of a special menu for detector maintenance and calibration at installation.
Explains the power supply specifications and battery backup for system autonomy.
Outlines how the system controls detectors, groups, and module lines for toxic and explosive gases.
Details the system's independent relay outputs for module lines, general alarms, and faults.
Explains that parameters like ventilation, alarms, and testing can be programmed per module line.
Describes the system's event memory capacity and memorization of maximums with data transmission.
Notes compatibility with 2 or 3-wire detectors via an optional interface.
Explains the meaning of different LED blinking patterns on the detectors.
Instructions for setting the date and time on the Siemens CC62P system.
Allows programming automatic ventilation intervals (1, 3, 6, 12, 24 hours) for the system.
Describes the 3 programmable alarm levels (Warning, Pre-alarm, Alarm) for gas detection.
Details the OPC Server software for accessing CC62P information, its specifications, and licensing.
Explains the ModBus integration options (RTU, TCP/IP) and requirements for connecting to a BMS.
To Next Page
