Siemens CF62 User Guide

©
Siemens AG 2003, I:\Mobil\R65\CF62_Leopard_abgel._von MC60_Maguro\en\_von_itl\fug\CF62_fug_en_040422\A65_Phone.fm
Calling18
VAR Language: English; VAR issue date: 10-Februar-2004
left page (18) of CF62 Leopard en, A31008-H6050-A1-1-7619 (28.04.2004, 11:45)
Calling
Dialling with number
keys
Open the clamshell to gain access
to the keypad.
The phone must be switched on
(standby mode).
J
Enter number (always
with area code/interna-
tional dialling code).
§Clear§ A short press clears
the last digit, a long press
clears the entire phone
number.
A
Press the Call key. The dis-
played phone number is
dialled.
End call
B
Press the End key briefly.
Press this key even if the
person on the other end
of the line has hung up
first.
Set volume
G
Use the top of the naviga-
tion key to start adjusting
the volume. Then press
top/bottom to adjust the
volume as required
(only possible during a
conversation).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redial
To redial the phone number last
called:
A
Press the Call key twice.
To redial other numbers that were
dialled previously:
A
Press the Call key once.
I
Pick out the required
phone number from the
list, then to dial ...
A Press ...

Siemens CF62 Specifications

General

Brand	Siemens
Model	CF62
Category	Cell Phone
Language	English