Siemens CF62 - Dynamic Light; Shut down Animation

©
Siemens AG 2003, I:\Mobil\R65\CF62_Leopard_abgel._von MC60_Maguro\en\_von_itl\fug\CF62_fug_en_040422\A65_Setup.fm
67Setup
VAR Language: English; VAR issue date: 10-Februar-2004
right page (67) of CF62 Leopard en, A31008-H6050-A1-1-7619 (28.04.2004, 11:45)
Shut down animation
Select animation to be shown when
phone is switched off.
Own greeting
Enter greeting to be displayed after
an animation when phone
is switched on.
E
Switch on/off.
J
Delete old text and create
new text.
§OK§ Confirm changes.
Big letters
You can choose between two font
sizes for the display.
Illumination
The illumination for the colour dis-
play and the 2nd display can each be
set independently.
Colour display
Set display light brighter/darker.
The darker the setting the longer the
standby time.
I
Press the navigation key
repeatedly to adjust up or
down.
2nd display
Switch the display light on or off.
Contrast
Set colour display contrast.
I
Press the navigation key
repeatedly to adjust up or
down.
Dynamic light
§Menu§KmKDynamic light
KSelect function.
The dynamic light consists of 7 LEDs
at the edge of the keyboard (page 6).
It is used to indicate visually different
events and functions, as well as the
current phone status (e.g.network
searching, battery low, etc.).
You can determine the visual signal
(LEDs) on the phone for certain func-
tions and events. The LEDs then flash
in different rhythms depending on
the current function.
You can also create your own flash
rhythms.
Show light effects
This enables you to switch the visual
signal on and off centrally for all
functions and events.
Play demo
All flash rhythms are displayed in
sequence. End with
§Cancel§. Show
next flash rhythm with
§Next§.