Siemens CF62 - Ring Tones; Ringer Setting; Silent Alert; Volume

©
Siemens AG 2003, I:\Mobil\R65\CF62_Leopard_abgel._von MC60_Maguro\en\_von_itl\fug\CF62_fug_en_040422\A65_RingTones.fm
Ring tones56
VAR Language: English; VAR issue date: 10-Februar-2004
left page (56) of CF62 Leopard en, A31008-H6050-A1-1-7619 (28.04.2004, 11:45)
Ring tones
§Menu§KKSelect function.
You can set the tones to match your
needs.
Ringer setting
On/Off Activate/deactivate all
tones.
Beep Reduce ring tone to a
short signal (beep).
Silent alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alternative.
The silent alert can also be activated
in addition to the ring tone (e.g. in
noisy environments). This function
is deactivated when the battery is
being charged or when the phone
is connected to the Car Kit.
The silent alert is activated if the
highest volume is set for the ring
tone. This is to remind you not to
hold the phone to your ear when ringing
in order to avoid damaging your
hearing.
Volume
Set different volumes for types of
call/functions.
I
Select:
Calls
Alarm
Alarm clock
Messages
Cell broadcast
Start melody
End melody
Applications
E
Press. The ringtone is
played.
I
Set volume.
E
Confirm.
Additional information
*
Hold down in standby mode to
switch ringtone on/off.
k
Display: Beep.
j
Display: ringer off.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ring tones.
If two independent phone numbers are
registered on your phone, you can set dif-
ferent volumes for them (page 77).