Siemens CFG3.F200 - Technical and Mechanical Design; LED Indicators

3
Technical and mechanical design
The compact build can be mounted on standard rails or walls.
1
Plastic housing
2
LEDs for communication and status
3
Service button
4 a)
2-port Ethernet switch with 2 LEDs per port
4 b)
1-port Ethernet interface with 2 LEDs for WAN
(Internet access)
5
Plug-in terminal blocks with screw terminals
Power supply
6
USB interface for 4G dongles
7
Not supported (For future release)
8
Not supported (For future release)
9
Slider for mounting on standard mounting rails
10
Eyelets for cable ties
11
Holes for wall mounting
12
Date / Series and Serial number
LED indicators
Activity
LED / Interface
Color
Activity
Function
Ethernet 1...3
Green
Continuously ON
Link active
Continuously OFF
No connection
Flashing
Network traffic
Yellow
Continuously ON
Link 100 Mbps
Continuously OFF
Link 10 Mbps
RUN
Green
Continuously ON
Device operational
Continuously OFF
Device not operational
Flashing
Start-up or program halted
Red
Continuously OFF
OK
Continuously ON
HW or SW fault – power off and on the
F200
Rapid flashing
Firmware or application
missing/corrupted
Blue
Continuously ON
Connection to the cloud OK
Flashing
No connection to the cloud
Onboarding to cloud not finished or
device certificates not updated