Siemens CL75 - Charging the battery

9Getting started
© Siemens AG 2003, C:\Daten_itl\Siemens\DTP-Satz\Produkte\CL75_Wega_1\output\SUG\CL75_2_en_050419_vz_pk_druck\S_WEGA_Startup.fm
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050405
right page (9) of CL75 SUG en, A31008-H1550-A1-2-7619 (17.05.2005, 09:24)
Display while in service
Charge level display during opera-
tion (empty – full):
V W X
A beep sounds when the battery is
nearly empty. The charge level of the
battery is only displayed correctly af-
ter an uninterrupted charging/dis-
charging cycle.
Do not remove the battery until the phone
has finished charging.
Switching phone on/off
B
Press and hold the
On/Off/End key to switch
on the phone.
Entering the PIN
The SIM card can be protected with a
4 to 8-digit PIN.
J
Enter the PIN using the
number keys. The charac-
ters
****
appear to ensure
nobody can read your PIN
on the display. Correct
with §Clear§.
§OK§ Confirm. Logging on to
the network will take a
few seconds.
Emergency number
(SOS)
Only to be used in real emergencies!
By pressing the §SOS§ soft key you can
make an emergency call on any net-
work without a SIM card and without
entering a PIN (not available in all
countries).
Additional information
The power supply unit heats up when used
for a long time. This is normal and not
dangerous.
If the battery is removed for longer than
30 seconds, the clock will be reset.
Additional information
Change PIN..................................page 14
Clearing SIM card barring.............page 15