5 / 38
Siemens Climatix HMI-TM CB1P3917en_redesigned
Smart Infrastructure Introduction 2023-06-13
1.2 Purpose and scope
This document provides information regarding the HMI-TM device, including its
functions and operations. The programming of HMI-TM is not covered in this
document, but shall be governed by the Climatix SCOPE.
The target readers of this document are technical personnel of OEM ACR
customer, who may use the information provided in this document to write user
manual for dedicated application.
1.3 Document conventions
The following symbols are used in this document to indicate warnings and notes:
This symbol draws your attention to special safety notes and warnings. Ignoring
such notes can lead to personal injury and/or major damage to property.
This symbol precedes the notes that must be observed in order to prevent
malfunctions or data loss.
Notes with this symbol provide important information requiring appropriate
attention.
Paragraphs with this symbol provide tips.
The following abbreviations are used in this document:
Abbreviation Explanation
BSP Board Support Package (operating system)
HMI Human Machine Interface (operation unit)
HMI-DM Climatix Dot Matrix HMI POL895.xx
HMI-IB Climatix In-Built on POL4xx/6xx
HMI-SG Climatix Segmented HMI POL822.xx
HMI-TP Climatix Touch Panel HMI POL8Tx
HMI-TM Climatix Text Matrix HMI POL871.xx
HVAC Heating, Ventilating, Air Conditioning
RU Room Unit (e.g. POL822.xx)
SCADA Supervisory Control and Data Acquisition
SELV Safety Extra-Low Voltage
Name Explanation
Climatix Controller family with common tools
SAPRO SAPRO programming tool
SCOPE SCOPE commissioning and service tool
STOP
To Next Page
Loading...
Need help?
General
