Basic settings en
19
14 Basic settings
You can configure the basic settings for your appliance
to meet your needs.
14.1 Overview of the basic settings
Here you can find an overview of the basic settings
and factory settings. The basic settings depend on the
features of your appliance.
Basic setting Selection
Language See selection on the appli-
ance.
Time Clock in 24-hour format.
Date – day Sets the current day
Date – month Sets the current month
Date – year Sets the current year
Signal tone Short duration
Medium duration
1
Long duration
Button tone Switched on
Switched off
1
Display brightness 5 settings
Clock display off
Digital
1
Lighting Off during operation
On during operation
1
Auto resume
(only applicable for the
Microwave operating
mode)
Do not resume microwave
automatically
1
When closing the door
Childproof lock Keylock only
1
After switch-on Main menu
Types of heating
1
Microwave
Microwave combination
Dishes
1
Factory setting (may vary according to model)
Basic setting Selection
Warning: Baking tray in
MW
Display
1
Do not display
Night-time dimming Switched off
1
Switched on
Brand logo Display
1
Do not display
Dry microwave Switched on
1
Switched off
Fan run-on Recommended
1
Minimum
Factory setting Reset
1
Factory setting (may vary according to model)
14.2 Changing the basic settings
1.
Press
.
2.
Press .
a The operating modes menu opens.
3.
Use the rotary selector to select the required operat-
ing mode "Settings".
4.
Press
to confirm.
a The first basic setting appears.
5.
Press
to switch between the different settings.
6.
Use the rotary selector to change the basic setting.
7.
Press .
a The display shows the changes "Save" or "Discard".
8.
Select the desired change using
or .
Note:Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
1.
Press
.
2.
Press to select "Discard".
a All your changes are discarded and not saved.
15 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
15.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING‒Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶ Do not use steam- or high-pressure cleaners to
clean the appliance.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶ Do not use harsh or abrasive cleaning products.
▶ Do not use cleaning products with a high alcohol
content.
▶ Do not use hard scouring pads or cleaning
sponges.
▶ Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
Using oven cleaner in a hot cooking compartment
damages the enamel.
▶ Never use oven cleaner in the cooking compartment
when it is still warm.
▶ Remove all food remnants from the cooking com-
partment and the appliance door before you next
heat up the appliance.
New sponge cloths contain residues from production.
▶ Wash new sponge cloths thoroughly before use.
To Next Page
Loading...
