Siemens CP 1543-1 - Page 62

Approvals
CP 1543-1
62 Operating Instructions, 05/2017, C79000-G8976-C289-07
Applied standards:
● ANSI ISA 12.12.01
● CSA C22.2 No. 213-M1987
APPROVED for Use in:
● Cl. 1, Div. 2, GP. A, B, C, D T3...T6
● Cl. 1, Zone 2, GP. IIC T3...T6
Ta: Refer to the temperature class on the type plate of the CP
Report / UL file: E223122 (NRAG, NRAG7)
Note the conditions for the safe deployment of the product according to the section Notes on
use in hazardous areas according to UL HazLoc (Page 27).
Note
For devices with C
-PLUG memory: The C-PLUG memory module may only be inserted or
removed when the power is off.
CSA
CSA Certification Mark Canadian Standard Association (CSA) nach Standard C 22.2 No.
142:
● Certification Record 063533–C-000
FM
Factory Mutual Approval Standards:
● Class 3600
● Class 3611
● Class 3810
● ANSI/ISA 61010-1
Report Number 3049847
Class I, Division 2, Group A, B, C, D, T4
Class I, Zone 2, Group IIC, T4
You will find the temperature class on the type plate on the module.
Australia - RCM
The product meets the requirements of the AS/NZS 2064 standards (Class A).